Posted on Leave a comment

Deconstructed Report of PG 5

Today we want to share the deconstruct  report of PG 5 with you.

PG 5 EP

Splitting the left shoe from middle

The section of left shoe, the insole uses full-length AIR STROBEL cushion.

Separating the vamp with insole.

The lining is comfortable.

The built-in counter and synthetic leather on the shoe heel improve the supporting performance.

The yellow shoe-pad is printed with PG logo

We can see the air cushion pattern clearly from the insole fabric.

The Air Strobel cushion above the insole

The length of EUR42.5 Air Strobel cushion is about 279mm

The width of EUR42.5 Air Strobel cushion on forefoot sole is about 90.62mm

The thickness of EUR42.5 Air Strobel cushion is about 7.29mm

The X type TPU arch supporting plate is between the air cushion and insole, it covers the whole arch.

The length of EUR42.5 arch supporting plate is about 70.94mm.

The width of  EUR42.5 arch supporting plate is about 62.85mm.

The thinnest part of EUR42.5 arch supporting plate is about 2.26mm thick.

The X TPU arch supporting plate and the triangle TPU on the outboard of insole can reduce the deformation.

It has a piece of soft TPU on the shoe heel, it can protect the air cushion.

The integrated rubber outsole

The thickness of EUR42.5 rubber outsole is about 3.47mm.

The point of strength height of EUR42.5 forefoot sole is about 16.74mm.

The point of strength height of EUR42.5 shoe heel is about 21.96mm. The drop height is 5.22mm.

PG5 VS PG 4

PG 5

PG 4

From the side section,PG 5(left)and PG 4(right) use the same AIR STROBEL cushion.

PG 5 (L): the arch of shoe heel is more flat, and the height is also increased.

PG 4 (R): the arch of shoe heel tilt inward obviously.

For the same size EUR42.5, the width of  PG5 (L) AIR STROBEL cushion is wider than PG 4 (R).

The X TUP arch supporting plate of PG 5 (L) can cover the whole arch, and it has independent TPU on the outboard of insole.

PG 4 (R) only has a piece of arch supporting plate.

The unit weight of EUR42.5 PG 4 is about 391.4g.

The unite weight of EUR42.5 PG 5 is about 349g, it reduces about 42g.

Deconstructed Report of PG 5

Vamp: The stiff mesh fabric has good supporting performance. The shoe tree is wider. The fitness is excellent. The lengthen pull-tab of shoe heel is convenient for putting on and taking off the shoes.

Insole: The AIR STROBEL cushion brings excellent feedback. The big TPU supporting plate improves the stability of insole.

Overall: PG 5 still uses the AIR STROBEL cushion as the insole technology. By adjusting the material of vamp and insole, the fitness, stability and comfort level have been improved. But the appearance is not attractive.

Posted on

Closed Look and Unboxing: Nike PG 5 EP

The released date of 5th Paul George signature shoes PG 5 is 8th, Jan. 2021. We have got it in advance. Let’s have a look at it.

PG 5 EP

The PG logo on the front of shoebox

PAUL GEORGE 5 on the side of shoebox

The shoe tag on the side of shoebox

The vamp is made of thick knit, and it’s embroidered with Swoosh logo and PG logo.

The forefoot vamp is made of synthetic leather.

The shoelaces

The shoe tongue is printed with PG logo.

The shoe heel is high. The thick foam fits the heel tendon well.

The shoe heel uses synthetic leather.

The insole of PG 5 is similar to PG 4, but it also has some difference.

Both sides of insole has upturning design.

The shoe head is also embossed with PG’s signature.

The lateral outsole of forefoot extends outward.

The outward of arch part has a piece of yellow TPU which is printed with NIKE AIR.

The inner side of forefoot outsole also has upturning design.

The upturning shoe heel outsole is printed with number 13 which is the uniform number of PG.

This design is for extruding the PG 5 series basketball shoes.

The rubber outsole is integrated type, It has the hollow-out design on the arch and rear sole part. It exposes the arch stabilizing plate and air cushion of rear sole. Except the hollow-out design, the outsole pattern of PG 5 is almost the same as KOBE 9.

The outsole pattern of KOBE 9

The forefoot sole is similar to the pattern of human sole. The water ripple improves the traction performance.

The arch stabilizing plate is printed with PG, it’s exposing.

We can see the AIR STROBEL cushion on the hollow-out rear sole.

It uses XDR outsole which suits for kinds of courts.

The shoe-pad is yellow.

The length of EUR42.5 shoe-pad is 275mm.

The width of EUR42.5 shoe-pad is 93.27mm.

The thickness of EUR42.5 shoe-pad is 7.06mm.

We can touch the AIR STROBEL cushion under the insole fabric.

We can see the two hollow-out design.

The unit weight of EUR42.5 shoes is about 349g.

Overall

The side of PG 5 is normal size. The shoe tree is suitable for most of people. The fitness is good. The stiff mesh fabric has good supporting and protecting performance. The high shoe heel is comfortable. The insole is soft, it has good resilience. The shoe-pad is about 7mm. For more details of the inner structure, please keep an eye on our website.